Mitsubishi Electric MELSEC iQ-R Series User Manual page 173

CH1 Warning output setting
Normal
Set whether to enable or disable the warning output.
For details on the warning output function, refer to the following.
Page 33 Warning Output Function
Setting value
0
1
If a value other than the above is set, a warning output setting range error (error code: 1B0H) occurs.
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory name
CH Warning output setting
■Enabling the setting
Turn on and off 'Operating condition setting request' (Y9).
■Default value
The default value is Disable (1) for all channels.
CH1 Rate control enable/disable setting
Normal
Set whether to enable or disable the rate control.
For details on the rate control function, refer to the following.
Page 35 Rate Control Function
Setting value
0
1
If a value other than the above is set, a rate control enable/disable setting range error (error code: 1B8H) occurs.
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory name
CH Rate control enable/disable setting
■Enabling the setting
Turn on and off 'Operating condition setting request' (Y9).
■Default value
The default value is Disable (1) for all channels.
Wave Synchronization
CH1
508
CH1
509
Description
Enable
Disable
CH2 CH3
708 908
Description
Enable
Disable
CH2 CH3
709 909
Appendix 3 Buffer Memory Areas
CH4
1108
A
CH4
1109
APPX
171