2
PARAMETER
This chapter describes the parameter settings of each channel.
Setting the parameters here eliminates the need for parameter setting by programming.
2.1
Parameter Setting Procedure
1.
Add the D/A converter module to the engineering tool.
Navigation window [Parameter] [Module Information] Right-click [Add New Module]
2.
The parameter setting includes four types of settings: basic setting, application setting, interrupt setting, refresh setting.
Set parameters by performing the following and selecting a desired setting from the tree displayed on the window.
[Navigation window] [Parameter] [Module Information] Select D/A converter module
3.
Write the settings to the CPU module using the engineering tool.
[Online] [Write to PLC]
4.
The settings are reflected by resetting the CPU module or powering off and on the system.
2 PARAMETER
2.1 Parameter Setting Procedure
2
113