Mitsubishi Electric MELSEC iQ-R Series User Manual page 168

High speed digital-analog converter module
Hide thumbs Also See for MELSEC iQ-R Series:
Table of Contents

Advertisement

CH1 Wave output warning address monitor
Wave
When a digital value of wave data causes a warning, this area stores the corresponding buffer memory address in 32-bit
signed binary for each channel.
When a warning has occurred in the multiple wave data, only the buffer memory address of the wave data where the warning
occurred first is stored.
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory name
CH Wave output warning address monitor
■Update of the stored value
When the first warning occurs in a wave output status other than "During wave output stop", the stored value is updated.
■Resetting the stored value
To reset the stored value, first change values of wave data that have been outside the setting range so that they fall within the
setting range. After that, turn on and off 'Error clear request' (YF) or 'Operating condition setting request' (Y9) for resetting.
CH1 D/A conversion status monitor
Common
This area stores the D/A conversion status.
D/A conversion status
External power supply OFF
D/A conversion disabled
Analog output disabled
Analog output enabled
*1 Depending on the status of the CPU module and the setting for the analog output HOLD/CLEAR function, the status of analog output
varies. ( Page 23 Analog Output HOLD/CLEAR Function)
*2 In the wave output mode, analog wave data is output according to 'CH1 Wave output status monitor' (Un\G401).
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory name
CH D/A conversion status monitor
APPX
166
Appendix 3 Buffer Memory Areas
CH1
442, 443
Description
The external power supply 24VDC is not supplied.
D/A conversion has been disabled. The D/A conversion in the corresponding channel is not
executed.
Analog output has been disabled. (D/A conversion has been enabled.)
Analog output has been enabled. According to digital values, the analog equivalents are output.
CH1
459
CH2
CH3
642, 643
842, 843
*1
CH2
CH3
659
859
CH4
1042, 1043
Stored value
-1
0
1
*2
2
CH4
1059

Advertisement

Table of Contents
loading

This manual is also suitable for:

R60dah4

Table of Contents