Connecting To Ut100 Series - Mitsubishi Electric GOT2000 Series Connection Manual

8.5.2

Connecting to UT100 Series

■1. Communication settings
Make the communication settings by operating the key of the temperature controller.
Item
Transmission speed
*1
Data bit
*1
Parity bit
*1
Stop bit
*1*2
Address
*1
Protocol selection
*1 Adjust the settings with GOT settings.
*2 Avoid duplication of the address with any of the other units.
8.5.3 Connecting to UT2000 Series
■1. Communication settings
Make the communication settings using setting switches.
Item
Transmission speed
*1
Data bit
*1
Parity bit
*1
Stop bit
*1*2
Station No.
Communication mode
*1 Adjust the settings with GOT settings.
*2 Avoid duplication of the station No. with any of the other units.
■2. Settings by switch
(1) Settings of the transmission speed and the parity
Make those settings by operating the communication setting Rotary switch.
Switch position
0
1
2
9600bps
7bits, 8bits
Even, odd, none
1bit, 2bits
1 to 99
0: PC link communication (without sum check)
1: PC link communication (with sum check)
9600bps
8bits (fixed)
Even, odd, none
1bit (fixed)
1 to 16
PC link communication mode
Communication mode
select DIP SW
Communication setting
Rotary switch
Station No. select
Rotary switch
Transmission speed
9600bps
8.5 Temperature Controller Side Setting
Set value
Set value
Parity bit
None
Odd
Even
8
8 - 37