Mitsubishi Electric GOT2000 Series Connection Manual page 47

■2. GOT Ethernet Common Setting
Set the following setting which is common to the standard port and the extension port, or port 1 and port 2.
Step 1.
Select [Common] → [GOT Ethernet Setting] → [GOT Ethernet Common Setting] from the menu to display
the [GOT Ethernet Setting] window.
Step 2.
Configure the following settings.
Item
Default Gateway
Peripheral S/W Communication Port No.
Transparent Port No.
■3. IP Filter Setting
Step 1.
Select [Common] → [GOT Ethernet Setting] → [IP Filter Setting] from the menu to display the [GOT
Ethernet Setting] window.
Step 2.
For the detailed settings, refer to the following manual.
➠
GT Designer3 (GOT2000) Screen Design Manual
Description
Set the router address of the default gateway where the GOT is
connected.
(Only for connection via router)
(Default: 0.0.0.0)
Set the GOT port No. for the communication with the peripheral S/W.
(Default: 5015)
Set the GOT port No. for the transparent function.
(Default: 5014)
1.1 Setting the Communication Interface
Range
0.0.0.0 to 255.255.255.255
1024 to 65534 (Except for 5011
to 5013, 49153 to 49170)
1024 to 65534 (Except for 5011
to 5013, 49153 to 49170)
1 - 17
1