■5. Precautions when preparing a cable
(1) Cable length
The length of the RS-485 cable must be 1200m or less.
(2) GOT side connector
For the GOT side connector, refer to the following.
➠
(3) Connectors on the MITSUBISHI ELECTRIC INDIA PLC side
Use proper connectors on the MITSUBISHI ELECTRIC INDIA PLC side.
For the details, refer to the User's Manual of the used MITSUBISHI ELECTRIC INDIA PLC.
■6. Connecting terminating resistors
(1) GOT side
Set the terminating resistor using the terminating resistor setting switch.
For the procedure to set the terminating resistor, refer to the following.
➠
(2) Connectors on the MITSUBISHI ELECTRIC INDIA PLC side
Use proper connectors on the MITSUBISHI ELECTRIC INDIA PLC side.
For the details, refer to the User's Manual of the used PLC manufactured by MITSUBISHI ELECTRIC INDIA.
13 - 10
13.3 Connection Diagram
1.4.1 GOT connector specifications
1.4.3 Terminating resistors of GOT