■7. GT21
Set the terminating resistor using the terminating resistor setting switch.
• For GT2103-PMBD
USB
Terminating resistor selector switch
POINT
POINT
POINT
(1) Terminating resistor selector switch position
The position of the terminating resistor selector switch depends on the GOT type.
For the details, refer to the following.
➠
GOT2000 Series User's Manual (Hardware)
(2) Terminating resistor of GS21
The terminating resistor of GS21 is fixed to 330 Ω.
For the details, refer to the following.
➠
GOT SIMPLE Series User's Manual
1.4 Connection Cables for the Respective Connection
1
1 - 37