Mitsubishi Electric GOT2000 Series Connection Manual page 408

(3) Ethernet connection type: EtherNet/IP (AB Tag)
This section describes [Connected Ethernet Controller Setting] when [AB Control/CompactLogix(Tag)] is selected for
the model.
Item
Host
Net No.
*1
Station
Unit Type
IP Address
Port No.
Communication
Connection
Slot No.
*1
10 - 28
10.3 Ethernet Connection
The host is displayed. (The host is indicated with an asterisk (*).)
Set the network No. of the connected Ethernet module.
(Default: blank)
Set the station No. of the connected Ethernet module.
(Default: blank)
AB (Tag) (fixed)
Set the IP address of the connected Ethernet module.
(Default: blank)
44818 (fixed)
TCP (fixed)
Connection setup
(Default: UCMM)
Set the slot No. connected to the CPU module in the PLC module.
(Default: blank)
Set different values for [GOT Station] of [Detail Setting] and [Station] of [Connected Ethernet Controller Setting].
➠
■2. Communication detail settings
POINT POINT POINT
[Connected Ethernet Controller Setting] of GT21 and GS21
(1) Effective range of [Connected Ethernet Controller Setting]
Only [1] to [4] of [Connected Ethernet Controller Setting] can be used for GT21 and GS21.
If [5] or later of [Connected Ethernet Controller Setting] is written to GT21 and GS21, the
setting is invalid on GT21.
(2) [Host] settings
Configure the [Host] settings for [1] to [4] of [Connected Ethernet Controller Setting].
Only [1] to [4]
can be used.
Description Range
―
1 to 239
1 to 64
AB (Tag) (fixed)
PLC side IP address
44818 (fixed)
TCP (fixed)
UCMM
Class3
0 to 20