■3. Unit address settings
Set the unit address using the unit address setting switch.
■4. Interval time settings
Configure the interval time setting using the RKC communication setting tool (WinPCI).
After the communication is started, set as follows.
Instrument
CFG file
Communication 1 interval time
Communication 2 interval time
For the using method of RKC communication setting tool, refer to the following.
➠
9 - 58
9.5 Temperature Controller Side Setting
COM
Setting item
RKC communication setting tool user's manual
Unit address setting switch
Setting range : 0 to F
0
ZCOM_rkc.cfg
0 to 250ms
Set value