Step 4.
Solder the contact to the internal conductor.
Step 5.
Insert the connector assembly shown in
Precautions for soldering
Note the following precautions when soldering the internal conductor and contact.
• Make sure that the solder does not bead up at the soldered section.
• Make sure there are no gaps between the connector and cable insulator or they do not cut into each other.
• Perform soldering quickly so the insulation material does not become deformed.
1 - 32
1.4 Connection Cables for the Respective Connection
Solder here
into the plug shell and screw the nut into the plug shell.