Mitsubishi Electric GOT2000 Series Connection Manual page 45

(2) [Extended Port], or [Port 2]
The following shows an example for [Extended Port].
Step 1.
Select [Common] → [GOT Ethernet Setting] → [GOT IP Address Setting] from the menu to display the
[GOT Ethernet Setting] window.
Step 2.
On the [Extended Port] tab, configure the following settings.
Item
Update GOT Ethernet extended port
setting
Enable Ethernet extended port
GOT IP Address
Subnet Mask
Select from GOT Setting List
Description
The GOT Ethernet extended port settings are applied on GOT.
Enable the ethernet extended port.
Set the IP address of the GOT IP Address.
(Default:192.168.5.22)
Set the subnet mask for the sub network. (Only for connection via router)
If the sub network is not used, the default value is set.
(Default: 255.255.255.0)
Select the GOT set in [GOT Setting List] dialog.
➠
GT Designer3 (GOT2000) Screen Design Manual
1.1 Setting the Communication Interface
Range
-
-
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.255
-
1 - 15
1