Mitsubishi Electric GOT2000 Series Connection Manual page 121

Graphic operation terminal (non-mitsubishi electric products 2)

Hide thumbs Also See for GOT2000 Series:

Table of Contents

Product manufactured by Fuji Electric Co., Ltd. For details of the product, contact Fuji Electric Co., Ltd.

When a GT10-C02H-6PT9P unit of the sub version A or B is used, do not ground the case of the D-sub (9-pin) connector.

GT25-W is not compatible to the option devices other than FA-LTBGT2R4CBL□□.

GT2505-V does not support the option device.

Depending on the hardware version of the PLC, the GOT cannot be connected.

The following shows the hardware versions of the PLC that can be connected.

For information on how to check the hardware version, refer to the following.

Manual of FUJI PLC

Hardware version

V21 or earlier

V25 or earlier

V22 or earlier

V24 or earlier

V21 or earlier

4.2 Serial connection

Chapters

Table of Contents