Actual Signals And Parameters; Chapter Overview; Terms And Abbreviations - ABB ACS800 Series Firmware Manual

Actual signals and parameters

Chapter overview

The chapter describes the actual signals and parameters. The fieldbus equivalent
value is given for each signal/parameter. More data is given in chapter
data: actual signals and

Terms and abbreviations

The table defines the terms and abbreviations used in the parameter and actual
signal tables.
Term
Absolute Maximum
Frequency
Absolute Maximum
Speed
Actual signal
FbEq
Parameter
parameters.
Definition
Value of 20.08 FREQUENCY MAX, or
absolute value of the minimum limit is greater than the maximum limit.
Value of 20.02 MAXIMUM SPEED, or
absolute value of the minimum limit is higher than the maximum limit.
Signal measured or calculated by the drive. Can be monitored by the
user. No user setting possible.
Fieldbus equivalent: The scaling between the value shown on the panel
and the integer used in serial communication.
A user-adjustable operation instruction of the drive.
Additional
20.07 FREQUENCY MIN if the
20.01 MINIMUM SPEED if the
Actual signals and parameters
63