Remote Critical Event; Remote Dying Gasp; Remote Errored Frame; Remote Errored Frame Period - NEC iPASOLINK EX Advanced Instruction Manual

CORRECTIVE MAINTENANCE

Remote Critical Event

This condition indicates that the hardware error is detected at the opposing site
equipment, which is reported via the Ethernet link. This is an alarm regarding
IEEE802.3ah, Link OAM.
Procedure 5-27
1.
2.

Remote Dying Gasp

This condition indicates that the equipment on the opposing site is in the reboot
process. This is an alarm regarding the IEEE802.3ah, Link OAM.
Procedure 5-28
1.
2.

Remote Errored Frame

This condition is not an alarm. The system detects that an
issued at the opposing site.

Remote Errored Frame Period

iPASOLINK EX Advanced: O
Replace the equipment at the opposing site.
Retrieve the
Current Status
cleared. If the alarm is not cleared, contact NEC for the further maintenance
support.
This step ends the procedure.
Check if any failures occur to the equipment on the opposing site, and if any
exist, clear them.
Retrieve the Current Status
cleared. If the alarm is not cleared, contact NEC for the further maintenance
support.
This step ends the procedure.
This condition is not an alarm. The system detects that an
message is issued at the opposing site.
& M
PERATION AINTENANCE
, and check if the
Remote Critical Event
, and check if the Remote Dying Gasp
alarm is
alarm is
message is
Errored Frame
Errored Frame Period
GGS-000548-01E
5-41
ETH
ETH
ETH
ETH