NEC iPASOLINK EX Advanced Instruction Manual page 461

8-142
Parameter
Policer Index
Item
Port
CoS
Policer Profile No.
VLAN ID
Enable
VLAN ID
VLAN Service Name
Parameter
EIR
CIR
EBS
CBS
5.
Figure 8-194 Information Dialog Box
GGS-000547-01E
Table 8-35 Add Policer Index Options
Value
1 to 256
(part/LAG providing
available port)
(available ports)
0 to 7, Any
1 to 64
(check box)
(radio button)
(read only)
(read only)
Table 8-36 Policer Profile Detail Setting Options
Value
0 to 10000000
0 to 10000000
0 to 128
0 to 64
Information
dialog box appears. Click the
QoS/Classification Setting
The
Description
Enter the Index number to assign.
Select the item providing the target port.
Select the target port.
Select the target CoS.
Select a number to assign the Policer Profile No.
Tick a box to enable the following options.
Click a radio button of the VLAN to be enabled.
Indicates the registered VLAN IDs.
Indicates the VLAN Service Names of the registered
VLAN.
Description
Specifies the Excess Information Rate. [unit: kbit/s]
Specifies the Committed Information Rate. [unit: kbit/s]
Specifies the Excess Burst Size. [unit: kbit/s]
Specifies the Committed Burst Size [unit: kbit/s]
OK
window updates the information.
iPASOLINK EX Advanced: S
Set ETH Function
button to proceed.
N S
ET ETWORK AND YSTEM
P
ROVISIONING