NEC iPASOLINK EX Advanced Instruction Manual page 538

Set Equipment Clock and Synchronization
4. Assign the appropriate value to each parameter:
Figure 9-13 PTP Logical Interface Setting Option Window
Table 9-4 PTP Logical Interface Setting Parameters (1 of 2)
Parameter
Interface Name
IP Address
Subnet Mask
CoS
VLAN ID
Enable (radio button)
Physical Port
Used (radio button)
iPASOLINK EX Advanced: S
Value
(text field)
x.x.x.x
x.x.x.x
0 to 7
(available VLAN IDs)
(available Port items.)
N S P
ET ETWORK AND YSTEM
Description
Name the interface to register.
Enter the IP Address. This option is voided when
Transport Mode selects PTP over Ethernet.
Enter the Subnet Mask address. This option is voided
when Transport Mode selects PTP over Ethernet.
Specify the Class of Service value.
Select a VLAN ID to enable.
Select a n ETH Port number to use.
ROVISIONING
9-11
GGS-000547-01E