4-26
4.4.5.2
Procedure 4-9
1. Launch and log in to
2. Click the
3. In the
4. Click a link in the Timing Source SW Control fields:
NOTE: The target object must NOT be in the Lockout mode.
Figure 4-38 Timing Source Switch Control Window
5.
Figure 4-39 Timing Source Switch Control Option Window
GGS-000548-01E
Switch Timing Sources
Maintenance
state to the maintenance mode. See
WebLCT Operation)
frame on the left, expand
MENU
submenu
Protection Control
Timing Source Switch Control
Timing Source Switch Control
mode (
or
Manual SW
dialog box appears.
Warning
.
WebLCT
button on the top of the
4.2.1 Change to Maintenance Mode (for
for operating steps.
to select
Timing Source Switch Control
window appears.
option window appears. Select a switching
), then click the
Forced SW
iPASOLINK EX Advanced: Operation & Maintenance
CONTROL ITEMS
window to switch the
WebLCT
Maintenance Control
click
button.
OK
, then its
. The