NEC iPASOLINK EX Advanced Instruction Manual page 334

Set ETH Function
4. Assign the appropriate value to each parameter:
Figure 8-14 ETH Port Setting Option Window
Parameter
Port Usage
Port Name
10GbE Usage
Media Type
Speed
iPASOLINK EX Advanced: S
Table 8-4 ETH Port Setting Parameters (1 of 2)
Value Description
Enable
Enable the port administratively.
Disable
Shut down the port administratively.
(text field) Enter the Ethernet Port name. Valid value is zero to 32 characters long.
Enable
Specifies to use the port as 10 Gbit/s Ethernet interface.
Disable
Specifies not to use the port as 10 Gbit/s Ethernet interface.
Electrical
Specifies the SFP Port to the Electrical use
Optical
Specifies the SFP Port to the Optical use.
AUTO
Sets Autonegotiation to select the speed at establishing each link.
Selecting AUTO disables Duplex and MDI and MDIX options below.
10Mbps
Specifies 10 Mbit/s rate.
100Mbps
Specifies 100 Mbit/s rate.
1000Mbps
Specifies 1000 Mbit/s rate.
N S
ET ETWORK AND YSTEM
P
ROVISIONING
8-15
GGS-000547-01E