Mstp Port; Modify Mstp Port - NEC iPASOLINK EX Advanced Instruction Manual

8-94

8.7.3 MSTP Port

8.7.3.1
NOTES:
1.
MSTP and ERP do not operate simultaneously on the same system. (To
enable MSTP, ERP should be disabled.)
2.
All VLANs belong to IST by default.
3.
In the IEEE 802.1ad mode, MSTP operation is disabled on ports that are
assigned to C-Access or C-Bridge.
4.
Default values for Timers and Hops are recommended to use. [Default
values for timers are compliant with the recommendations.]
5.
VLANS that are assigned to instances and that are to ports are not
interdependent. VLANs should be assigned to all ports that are associated
with the MSTP equipment. If not, signals may not be transmitted through the
path though it is concluded by the protocol.
Procedure 8-29
1. Launch and log in to
2. In the
3. Check if the indicating mode is
 If the indicated STP Mode is not MSTP, change the mode using procedure in
Figure 8-133 RSTP / MSTP Setting Window (for MSTP Mode)
GGS-000547-01E

Modify MSTP Port

WebLCT
MENU
frame on the left, expand
Function Setting
to select
window appears.
8.7.1 Select STP Mode for Setting Procedure
Indicates MSTP
.
Provisioning
RSTP/MSTP Setting
MSTP
, then click
Modify STP Port button
iPASOLINK EX Advanced: S
Set ETH Function
, then its submenu
RSTP/MSTP Setting
. The
Modify STP Port
tool button.
.
N S P
ET ETWORK AND YSTEM
ETH
ROVISIONING