Table of Contents
Advertisement
Set ETH Function
Parameter
Port/VLAN Configuration
VLAN Assignment
VLAN Mode
Port Type
X VLAN Assignment
Clear
Enable
Untag Frame Assignment
(Access Port)
Swap Enable
External Used VLAN
Figure 8-37 Set External VLAN to Swap to
➀
Tick a check box to enable External Used VLAN.
➁
Click the link.
➂
Enter the VLAN ID.
➃
Click OK button.
iPASOLINK EX Advanced: S
Table 8-6 VLAN Setting Parameters
Value
(read only)
802.1Q
Access
Tunnel
Trunk
(button)
(check box)
(radio button)
(check box)
(see below)
N
S
P
ET
ETWORK AND
YSTEM
Description
Indicates the information of selected port.
Indicates the VLAN Mode of the selected port.
Allows untagged frames and tagged frames with matching
VLAN IDs to pass through.
Allows both untagged and tagged frames to pass through.
Allows the selected tagged and untagged frames to pass
through. An untagged frame will be assigned with the
specified VLAN ID.
Clicking here removes ticks from all check boxes.
Tick the check box to select a VLAN to assign the selected
port type configuration.
Clicking the radio button assigns a VLAN ID to the untagged
frame.
Tick the check box to enable the swap mode on the selected
VLAN, which enables the External Used VLAN filed below.
Specifies VLAN ID to swap to. See
➀
➃
ROVISIONING
8-31
Figure 8-37
below.
➁
➂
GGS-000547-01E
Advertisement
Chapters
Table of Contents
