NEC iPASOLINK EX Advanced Instruction Manual page 488

Set ETH Function
4. Specify the filter conditions, then click the
Figure 8-233 Add Filter Entry Option Window
Parameter
Filter Type
Filtering Rule
Filtering Mode
Source MAC
Address
Destination MAC
Address
CoS
VLAN ID
Ethernet Type
iPASOLINK EX Advanced: S
Table 8-46 Add Filter Entry Parameters
Value Description
(read only) Indicates the filter type.
(read only) Indicates the filtering mode.
Any Selecting Any specifies no particular source MAC address to filter.
Unticking (removing a tick from) the Any check box enables the text field
(text field)
below. Enter the Source MAC Address (xx:xx:xx:xx:xx:xx) to filter.
Any Selecting Any specifies no particular destination MAC address to filter.
Unticking (removing a tick from) the Any check box enables the text field
(text field)
below. Enter the Destination MAC Address (xx:xx:xx:xx:xx:xx) to filter.
Any Selecting Any specifies no particular CoS value to filter.
0 to 7 Unticking (removing a tick from) the Any check box enables the text field
below. Enter the CoS value to filter.
Any Selecting Any specifies no particular VLAN ID to filter.
1 to 4094 Unticking (removing a tick from) the Any check box enables the text field
below. Enter the VLAN ID to filter.
Any Selecting Any specifies no particular Ethernet Type to filter.
0x0000 to Unticking (removing a tick from) the Any check box enables the text field
0xFFFF
below. Enter the Destination MAC Address to filter.
N S
ET ETWORK AND YSTEM
OK
P
ROVISIONING
button.
GGS-000547-01E
8-169