Lag Revert Control - NEC iPASOLINK EX Advanced Instruction Manual

CONTROL ITEMS

4.4.4 LAG Revert Control

This option is used to put the original Active ETH Port back in service manually
when recovered from the failure.
Procedure 4-7
1. Launch and log in to
2. Click the
3. In the
4. Click the target group from the
Figure 4-29 LAG Revert Control
iPASOLINK EX Advanced: O
Maintenance
state to the maintenance mode. See
WebLCT Operation)
frame on the left, expand
MENU
submenu Protection Control
window appears.
Control
LAG Revert Control
& M
PERATION AINTENANCE
.
WebLCT
button on the top of the
4.2.1 Change to Maintenance Mode (for
for operating steps.
to select LAG Revert Control
column
LAG
click to select a target
option window appears.
WebLCT window to switch the
Maintenance Control
. The LAG Revert
GGS-000548-01E
4-21
, then its