NEC iPASOLINK EX Advanced Instruction Manual page 519

8-200
4. Modify the settings, then click the OK button.
Figure 8-280 LLF Setting (Modify) Option Window
Parameter
LLF GRP ID
Trunk Port Setting
Item
Port
Send LLF Signal
GGS-000547-01E
Table 8-51 LLF Setting (Modify) Parameters (1 of 2)
Value Description
Indicates the selected LLF GRP ID number.
(read only)
(available Selects to change the target equipment.
equipment)
(available port) Selects to change the target port.
Enable
Enables sending the LLF Signals.
(This option is currently not editable.)
Disable
iPASOLINK EX Advanced: S
Set ETH Function
N S P
ET ETWORK AND YSTEM ROVISIONING