NEC iPASOLINK EX Advanced Instruction Manual page 247

5-20
Parameter
TX Interval
TX Hold
Item / Port
Link
LLDP Usage
LLDP Mode
5. When completed, click the
6.
Figure 5-26 Information Dialog Box
7.
Figure 5-27 LLDP Setting Window
GGS-000547-01E
Table 5-6 LLDP Setting Parameters
Value
5 to 32767
2 to 10
NMS
(read only)
Used
Unused
Standard
Proprietary MAC
dialog box appears. Click the
Information
window updates the information. Verify the displayed information.
LLDP Setting
This step ends the procedure.
Description
Specify the transmission interval. [unit: second]
Specify the time-to-live value expressed as a multiple of TX
Interval. [unit: times]
——
Indicates the current state.
Select to set Use or Not to Use the Link Layer Discovery Protocol.
Selecting Used enables the LLDP Mode option below.
Enables to run the standard LLDP MAC.
Enables to run NEC proprietary LLDP MAC. This option is helpful
to locate an iPASOLINK where an L2SW discarding standard
LLDP frames is in between two iPASOLINKs' management ports.
button.
OK
iPASOLINK EX Advanced: S
NETWORK MANAGEMENT
button to proceed.
OK
N S
ET ETWORK AND YSTEM
P
ROVISIONING