NEC iPASOLINK EX Advanced Instruction Manual page 465

8-146
Parameter
Policer Index
Item
Port
CoS
Policer Profile No.
VLAN ID
Enable
VLAN ID
VLAN Service Name
Parameter
EIR
CIR
EBS
CBS
5.
Figure 8-198 Information Dialog Box
GGS-000547-01E
Table 8-37 Add Policer Index Options
Value
(read only)
(read only)
(read only)
0 to 7, Any
1 to 64
(check box)
(radio button)
(read only)
(read only)
Table 8-38 Policer Profile Detail Setting Options
Value
0 to 10000000
0 to 10000000
0 to 128
0 to 64
Information
dialog box appears. Click the
QoS/Classification Setting
The
Description
Indicates the selected index number.
Indicates the port type assigned to the selected index.
Indicates the port number assigned to the selected index.
Select the target CoS to modify
Select a number to modify the Policer Profile No.
Tick a box to enable the following options.
Click a radio button of the VLAN to be enabled.
Indicates the registered VLAN IDs.
Indicates the VLAN Service Names of the registered VLAN.
Description
Modify the Excess Information Rate. [unit: kbit/s]
Modify the Committed Information Rate. [unit: kbit/s]
Modify the Excess Burst Size. [unit: kbit/s]
Modify the Committed Burst Size [unit: kbit/s]
OK
window updates the information.
iPASOLINK EX Advanced: S
Set ETH Function
button to proceed.
N S
ET ETWORK AND YSTEM
P
ROVISIONING