Execute Loop Detection - NEC iPASOLINK EX Advanced Instruction Manual

4-18
4.4.3.2
This option is used to verify the registered ERP.
Procedure 4-6
1. Launch and log in to
2. Click the
3. In the
4. Click the
Figure 4-25 ERP Control Window
GGS-000548-01E

Execute Loop Detection

Maintenance
state to the maintenance mode. See
WebLCT Operation)
frame on the left, expand
MENU
submenu
Protection Control
window appears.
Loop Detection Restart
Loop Detection Restart tool button
ERP Control (Loop Detection Restart)
.
WebLCT
button on the top of the
4.2.1 Change to Maintenance Mode (for
for operating steps.
to select
tool button.
option window appears.
iPASOLINK EX Advanced: Operation & Maintenance
CONTROL ITEMS
window to switch the
WebLCT
Maintenance Control
. The
ERP Control
, then its
ERP Control