NEC iPASOLINK EX Advanced Instruction Manual page 428

Set ETH Function
10.
Figure 8-151 Step 3 ERP LOC Detection MEP Index Setting Option Window
Table 8-28 Step 3 ERP LOC Detection MEP Index Setting Parameters
Parameter
LOC Detection
Ring Port0
LOC Detection
MEP Index
Ring Port1
LOC Detection
MEP Index
iPASOLINK EX Advanced: S
Step 3 ERP LOC Detection MEP Index Setting
the appropriate values, then click the
Value
Enable
Disable
(radio button)
(radio button)
N S
ET ETWORK AND YSTEM
Next
button.
Description
Enables to detect failures for switching the Ring using
ETH-CC. To carry out the switching under 50 ms, this
setting is required with 3.3 ms ETH-CC setting.
Disables the LOC Detection.
Click (select) to enable the use of MEP Index.
Click (select) to enable the use of MEP Index. This
option does not need to be set for Sub-Ring
(Interconnection Node).
P
ROVISIONING
option window appears. Assign
GGS-000547-01E
8-109