Table of Contents
Advertisement
Set ETH Function
4. Assign the appropriate value to each parameter:
Figure 8-140 Detail STP Parameter Setting Option Window
Parameter
STP Bridge MAX Age
STP Bridge Hello Time
STP Bridge Forward Delay
STP TX Hold Count
STP MAX Hop Count
5. When completed, click the
6. Click the
Figure 8-141 Information Dialog Box
iPASOLINK EX Advanced: S
Table 8-25 Detail STP Parameter Setting
Value
6 to 40
2
4 to 30
1 to 10
1 to 40
OK
button to proceed.
N
S
P
ET
ETWORK AND
YSTEM
Description
Sets the period to store the BPDU Configuration.
Bridge acknowledges that a topology change has
occurred when the MAX Age passes putting the
BPDU aged out. [unit: second]
A period for sending the BPDU Configuration from
Root Bridge. The value is fixed to 2 seconds.
Sets the delay period to execute the change from the
Listening Port to Learning Port.
The value of this option should be greater than a
half of the STP Bridge MAX Age values plus 1.
[unit: second]
Sets the number of BPDUs that can be sent per
second.
Specifies hop counts.
OK
button. Information dialog box appears.
ROVISIONING
8-101
GGS-000547-01E
Advertisement
Chapters
Table of Contents
