Configuring A Channel - GE TransPort PT900 User Manual

4.2 Configuring a Channel

Selecting the PROGRAM>Channel option on the APP screen (see Figure 71 below)
enables you to set up a channel for measuring flow rate. The PT900 supports up to
two channels, channel 1 and channel 2 . They are programmed individually, and the
programmed information can be saved in a PRESETS file.
To completely configure a channel, the following menus must be programmed:
•
PIPE (see "Programming the PIPE Menu" on page 61)
•
FLUID (see "Programming the FLUID Menu" on page 64)
•
TRANSDUCERS
page 66)
•
PLACEMENT
®
TransPort PT900 User's Manual
Figure 71: The Program Channel Menu
(see "Programming the TRANSDUCERS Menu" on
(see "Programming the PLACEMENT Menu" on page 72)
Chapter 4. Programming
59