GE TransPort PT900 User Manual page 45

2.5.6c Even-Traverse Installations (Spacing>305 mm/12 in.)
(cont.)
2. Place the yoke on the top of the pipe (see Figure 36 below). If the required
transducer spacing is <305 mm/12 in., the yoke chain must be placed
within the clamping fixture as shown.
3. Wrap the yoke chains around the pipe and secure them to the yoke bracket,
as shown in Figure 37 below.
®
TransPort PT900 User's Manual
Figure 36: Yoke Placement On Top of Pipe
Figure 37: Yoke Chains Secured
Chapter 2. Installation
29