Chapter 2. Installation
2.5.6c
Even-Traverse Installations (Spacing>305 mm/12 in.)
(cont.)
8.
Loosen the yoke screw. Then, apply couplant to the transducer face and
insert the transducer into the yoke, as shown in Figure 41 below.
9.
Tighten the yoke screw until the transducer firmly contacts the pipe. Your
completed odd-traverse installation should look like Figure 42 below.
32
Figure 41: Insert Transducer into Yoke
Figure 42: Completed Installation (Top View)
®
TransPort
PT900 User's Manual