Chapter 2. Installation
2.7.2 Replacing the Batteries
CAUTION!
rechargeable batteries. The battery charges even when the unit
is Off . Do not attempt to recharge non-rechargeable batteries.
To replace the battery pack:
1.
Remove the rubber boot from the transmitter.
2.
Open the panel on the back of the transmitter (see Figure 50 below).
3.
Disconnect and remove the old battery pack.
4.
Install the new battery pack.
5.
Reinstall the panel and the rubber boot on the transmitter.
40
Replace the PT900 batteries only with the specified
[Battery Panel]
Figure 50: Battery Panel Location
®
TransPort
PT900 User's Manual