Chapter 3. Initial Setup
Chapter 3. Initial Setup
3.1 Introduction
This chapter provides instructions for programming the PT900 flow meter via the
tablet APP prior to initial operation.
3.2 Charging the PT900 Transmitter and Tablet
Before proceeding, make sure that both the PT900 Transmitter and the Tablet are
fully charged. The AC power adapters are shipped in the carry case. If either the
transmitter or the tablet cannot be powered On after charging, contact your GE
representative or visit
www.gemeasurement.com
for assistance.
3.3 Installing or Updating the PT900 APP
The instructions in the following sections explain the procedures for downloading
the current version of the PT900 APP and installing it on your tablet.
3.3.1 Checking the APP Version
To check the APP version currently on your tablet, click on the About option in the
Help
menu to open a screen similar to Figure 53 below. This screen displays
general information about the PT900 system. This information includes: model
name, instrument type, software version, and the copyright year of the APP.
Figure 53: The About Screen
®
TransPort
PT900 User's Manual
45