GE TransPort PT900 User Manual page 39

2.5.6b Odd-Traverse Installations (cont.)
2. Place the yoke on the top of the pipe (see Figure 26 below). If the required
transducer spacing is <305 mm/12 in., the yoke chain must be placed
within the clamping fixture as shown.
3. Wrap the yoke chains around the pipe and secure them to the yoke bracket,
as shown in Figure 27 below.
[Spacing
>305 mm/12 in.]
®
TransPort PT900 User's Manual
Figure 26: Yoke Placement On Top of Pipe
Figure 27: Yoke Chains Secured
Chapter 2. Installation
[Spacing
<305 mm/12 in.]
23