GE TransPort PT900 User Manual page 74

Chapter 4. Programming
4.1 Configuring the Units of Measurement (cont.)
From the APP side menu, click Unit Options under the PROGRAM menu. This will
open the UNITS OF MEASUREMENT menu shown in Figure 70 on page 57.
To program the UNITS OF MEASUREMENT , complete the following steps:
1. Move the slide switch at the top of the menu to either Metric or English to
select the desired PT900 global measurement units system.
2. Based on your selection above, the units for all of the PT900 measurement
parameters will be automatically populated with default units.
a. Some of the parameters have only one units of measure choice
available. The text boxes for these parameters are grayed out, and the
default units cannot be changed.
b. Some of the parameters have multiple units of measure choices
available. The text boxes for these parameters are active, and the
default units can be changed by opening the drop-down list and
selecting the desired units.
3. After you have completed your programming, click the OK button to save
your choices or click the CANCEL button to discard the changes.
58
®
TransPort PT900 User's Manual