GE TransPort PT900 User Manual page 76

Chapter 4. Programming
4.2 Configuring a Channel (cont.)
Using Channel 1 as an example, refer to Figure 72 below and complete the
following steps:
1. Change the channel status from Off to On . This will not only activate the
channel, but it will also activate the two programming buttons.
2. If the other channel has already been programmed, click the COPY CH
button to copy all programming data from the other channel to the current
channel. In this example, it will copy the Channel 2 data into Channel 1 to
simplify the programming.
3. After the current channel has been programmed, click the PRESETS button
to save the programming data to a file stored in the PT900 transmitter
memory. These site data files may be uploaded to the APP via the USB
link the next time the PT900 is installed at the same site.
60
Figure 72: Channel 1 Programming
®
TransPort PT900 User's Manual