7.2 Updating the PT900 Software (cont.)
4.
In the APP TRANSMITTER menu, click the UPDATE button (see Figure 106
below) to start the update.
Figure 106: UPDATE Button in TRANSMITTER Menu
The system will check the validation of the new image file by checksum. If the
check is OK , the new software will load in the next reboot. If the check is NO , the
original software will load in the next reboot.
5.
At the screen shown in Figure 107 below, click the OK button to confirm
the update and continue.
®
TransPort
PT900 User's Manual
Figure 107: Update Confirmation Screen
Chapter 7. Configuring the Transmitter
113