Chapter 6. Logging Data; Introduction - GE TransPort PT900 User Manual

Chapter 6. Logging Data

6.1 Introduction

The PT900 transmitter supports an easy-to-use data logging function, which allows
diagnostic and measurement data to be recorded in a log file. To create a log file,
the following parameters must be specified:
•
The following Channels are available for logging:
•
CHANNEL 1
•
CHANNEL 2
•
Average CHANNEL
•
General CHANNEL
•
See Table 12 on page 93 for a complete list of the measurement variables
available for each of the above channels.
•
The start time and date, end time and date, and the time interval must be
specified for the log.
•
The logged data file is recorded in .CSV format. The log files can be
accessed via the PT900 USB port, and they can be opened with most
common text editors.
•
The time interval, the length of the logging run and the number of logs all
affect the total amount of memory required to store all of your log files.
The total memory usage and the remaining unused memory can be viewed
in the TRANSMITTER STORAGE menu.
®
TransPort PT900 User's Manual
(34 available variables)
(34 available variables)
(12 available variables)
(10 available variables)
Chapter 6. Logging Data
101