GE ApexPro Service Manual page 62

Service interfaces
Bed Duplicator navigation
Tower/bed properties
4-14
OR
Via the command line utility:
Select Start > Run.
Type cmd and press Enter.
Type c: and press Enter.
Type cd program files\marquette\pts\<version> and press Enter.
NOTE
The active software version of the ATS should replace <version> in
this string.
Type bedduplicator and press Enter.
3. The message Waiting for network communication displays as the Bed
Duplicator starts up. When startup is complete, the available towers are listed in
the Device List.
To view beds admitted to a tower, select the plus sign (+) to the left of the tower.
To view properties information, right-click the bed/tower in the Device List, and
select Properties.
Tower properties
ApexPro™ Telemetry
217A
218A
219A
2001989-203C