2001989-203C
NOTE
Note the position of the temperature sensor DIP switches for re-assembly.
7.
Using a phillips screwdriver, remove the screw securing the temperature sensor
at the back of the chassis floor, next to the power supply module.
NOTE
Note the position of the temperature sensor DIP switches for re-assembly.
8.
Disconnect the temperature sensor wiring harness plug from the receptacle at the
back right edge of the SNMP.
ApexPro™ Telemetry
Parts lists, drawings and replacement
Number
Position
1
OFF
2
OFF
3
ON
4
ON
Number
Position
1
OFF
2
OFF
3
OFF
4
ON
070A
075A
076A
7-33