Fan Filter - GE ApexPro Service Manual

Fan filter

PN 2021512-011
PN 2021512-011: Frame and filter are separate;
only the filter is supplied in the FRU
2001989-203C
1. Turn the latch securing the front service door on the front panel of the ATS and
open the door.
2. Slide the filter frame out of the service opening.
3. For the 2021512-011 FRU only, remove the foam filter from the filter frame.
4. Follow the applicable instructions, depending on the FRU you are replacing.
If you are replacing the PN 2021512-011 FRU with a new PN 2021512-011
FRU, replace the foam filter only.
If you are replacing the PN 2021512-011 FRU with a new PN 2021512-022
FRU, discard the PN 2021512-011 FRU and install the PN 2021512-022
FRU.
5. Reverse the steps in this procedure to install the fan filter.
ApexPro™ Telemetry
Parts lists, drawings and replacement
PN 2021512-022
PN 2021512-022: Frame and
filter are integrated in the FRU
Drive bay
door latch
203A
011A & 010A
043A & 013A
7-5