Maintenance; Recommended Tools - GE ApexPro Service Manual

Checkout

Maintenance

Recommended tools

8-4
Inspect fans and power supply.
Inspect connectors. See Connectors on page 8-7.
Inspect cable insulation. See Cable insulation on page 8-8.
Clean external surfaces. See External surfaces on page 8-9.
Clean internal components.
Clean fans. See Fans and filters on page 8-11.
Clean filters. See Fans and filters on page 8-11.
Perform installation check.
Perform disk check, if needed.
Perform ApexPro Channelized Telemetry System receiver check.
Channelized Telemetry System receiver check on page 8-15.
Perform power fail alarm verification test (power).
verification test (power) on page 8-16.
Perform ground continuity test.
Perform ground (earth) wire leakage current tests.
leakage current tests on page 8-16.
Perform enclosure (chassis) leakage current tests.
leakage current test on page 8-17.
Verify that the Remote Service agent is enabled.
agent on page 5-12.
Leakage tester
Digital multimeter
ESD mat and wrist strap
Standard hand tools
ApexPro™ Telemetry
See Fans on page 8-7.
See Internal components on page 8-11.
See Perform installation check on page 5-16.
See Disk check on page 6-17.
See Power fail alarm
See Ground continuity test on page 8-13.
See Ground (earth) wire
See Enclosure (chassis)
See Enable the Remote Service
See ApexPro
2001989-203C