Parts lists, drawings and replacement
Power module
7-30
23. Disconnect the ATX feature select and backplane voltage monitor connectors
from the top front corner of the CPU riser board. Note the position and
orientation of the connectors for reassembly
ATX feature
select
connector
24. Using a phillips screwdriver, remove (for installation) the three screws securing
the CPU riser board to the chassis.
25. Lift the CPU riser board up and out of the chassis.
26. Reverse the steps in this procedure to install the CPU boards.
WARNING
SHOCK HAZARD — Never open the power supply.
There are no field serviceable components inside. Capacitors inside
the power supply case present a shock hazard even with the power
switched off and the power cord removed.
ApexPro™ Telemetry
040A
Backplane voltage
monitor connector
213A
212A
2001989-203C