Indicators; Unity Network Description/Connection - GE ApexPro Service Manual

Equipment overview

Indicators

LED indicators
Webmin indicators

Unity Network description/connection

2-6
Specific information associated with rectifying conditions indicated by an audible
alarm is in service status indicators.
The LED indicators on the left side of the ATS front panel serve to show system
status, as described in the following table:
LED
POWER Redundant power supply failure.
HDD N/A
TEMP Indicates overheating above maximum
allowable temperature.
FAN Indicates cooling fan failure.
NOTE
Red LEDs indicate critical system conditions requiring immediate service
attention. They are accompanied by an audible alarm buzzer. For specific
information associated with rectifying conditions indicated by red LED status
indicators. See Service status indicators on page 6-8.
The Webmin application provides many utilities for monitoring real-time ATS
settings, conditions and values.
The ATS, running the ApexPro Host software, is a telemetry component of the Unity
Network family of devices. It is also the physical connection point between ApexPro
telemetry devices and the CIC Pro center server.
ApexPro™ Telemetry
See Service status indicators on page 6-8.
POWER POWER
HDD HDD
TEMP TEMP
FAN FAN
Red
Normal
Indicates hard drive access
Normal
Normal
See Troubleshooting on page 6-1.
004A
Green/Orange
2001989-203C