GE ApexPro Service Manual page 133

2001989-203C
2. Remove the chassis cover.
3. Disconnect the power cable connector from the receptacle on the CPU module.
4. Disconnect the CD data cable connector from the left front edge of the CPU
module.
5. Unplug the SNMP extension board from the SNMP connection board. Gently
wiggle the SNMP extension board to help remove it from the connection board.
6. Disconnect the SNMP battery connection from the receptacle on the top of the
SNMP connector board.
7. Using an open-end wrench, remove the 2 nuts securing the SNMP battery bracket
to the chassis.
8. Remove battery/bracket from the screws
ApexPro™ Telemetry
Parts lists, drawings and replacement
See Chassis cover on page 7-6.
040A
038A
056A
022A
186A
7-15