GE ApexPro Service Manual page 12

Introduction
Dangers
Warnings
1-4
Danger statements identify an imminent hazard which, if not avoided, will result in
death or serious injury. No danger statements apply to this product.
Warning statements identify a potential hazard or unsafe practice which, if not
avoided, could result in death or serious injury.
WARNING
ACCESSORIES (EQUIPMENT) — The use of accessory
equipment not complying with the equivalent safety requirements of
the device may lead to a reduced level of safety of the resulting
system. Consideration relating to the choice shall include:
use of the accessory in the patient environment; and
evidence that the safety certification of the accessory has been
performed in accordance to the appropriate UL/IEC/EN 60950
series safety standards for IT equipment.
WARNING
ACCESSORIES (SUPPLIES) — To ensure patient safety, use only
parts and accessories manufactured or recommended by GE.
Parts and accessories used must meet the requirements of the
applicable UL/IEC/EN 60950 series safety standards for IT
equipment.
WARNING
BEFORE USE — Periodically, and whenever the integrity of the
device is in doubt, test all functions.
WARNING
EXPLOSION HAZARD — Do not use this equipment in the
presence of flammable anesthetics, vapors or liquids. Severe burns/
injury can result.
WARNING
LOSS OF ALARMS/DATA — The ApexPro Telemetry Server
(ATS) running ApexPro software v4 is compatible with CIC Pro
centers (BCM, Nightshade, and Omnitech) running ApexPro v3.9
and above. Sharing of the same care unit names between ATS and
CIC Pro centers having incompatible ApexPro software versions can
result in lost or corrupted telemetry alarm defaults data and loss of
audible alarms.
ApexPro™ Telemetry 2001989-203C