Inmail – Automatic Access To Vm By Caller Id - NEC UNIVERGE SV9100 Features And Specifications

Hide thumbs Also See for UNIVERGE SV9100:

Table of Contents

InMail – Automatic Access to VM by Caller ID

Before, when a user outside the system accessed their InMail mailbox, they dialed voice mail, then

entered an access code followed by their mailbox number and password (if enabled). An InMail mailbox

can be associated with a specific caller ID (CID) number. When the CID number is presented to the

InMail it will automatically log the user into their mailbox. This enhancement improves VM accessibility

for outside callers, allowing them to simply dial the main voice mail number and be automatically logged

into their mailbox.

Two types of voice mail access modes exist for this feature.

Specifying the VM Pilot number as a DID/DIL/DISA/VRS destination.

Dialing the VM pilot number after calling in from a Mobile Extension.

Program to forward a call to VM (102) by any of following Programs.

Program 22-05-01 (Incoming Ring Group)

Program 22-11-05 (Transfer Target number -1)

Program 22-11-06 (Transfer Target number -2)

Program 25-03-01 (Incoming Ring Group No.)

Program 25-04-01 (VRS/DISA Transfer Ring Group at No answer/Busy)

Example – User Access to Voice Mail