NEC UNIVERGE SV9100 Features And Specifications page 209

Program
Program Name/Description
Number
20-08-15 Class of Service Options (Outgoing Call
Service) – Block Outgoing Caller ID
Turn Off or On a user Class of Service from
automatically blocking outgoing Caller ID
information when a call is placed. If block is
enabled, the system automatically inserts the
Caller ID block code *67 (defined in Program
14-01-21) before the user dialed digits (this
requires Program 14-02-10 to be enabled). If
block is disabled, the system outdials the call
just as it was dialed by the user.
20-08-16 Class of Service Options (Outgoing Call
Service) – Display E911 Dialed Extension
Name and Number
Turn Off or On an extension ability to display
the name and number of the extension that
dialed 911.
20-08-17 Class of Service Options (Outgoing Call
Service) – ARS Override of Trunk Access
Map
Turn Off or On an extension user ability to
override the trunk access map programming for
outgoing calls.
20-08-19 Class of Service Options (Outgoing Call
Service) – Hotline for SPK
Turn Off or On an extension user ability to
activate hotline or ringdown when pressing the
Speaker key.
20-08-20 Class of Service Options (Outgoing Call
Service) – Hot Key Pad
Turn Off or On an extension user ability to make
a call by just dialing the number without first
going off-hook.
20-08-21 Class of Service Options (Outgoing Call
Service) – Automatic Trunk Seizing by
Pressing Speaker Key
Enable/Disable the ability to access trunks
when going off-hook by pressing the speaker
key for each Class of Service.
20-08-22 Class of Service Options (Outgoing Call
Service) – Voice Over to busy Virtual
Extension
Enable/Disable the ability to make voice over to
a busy virtual extension for each Class of
Service.
20-08-23 Class of Service Options (Outgoing Call
Service) – Display Indication for Security
Sensor Detection
Enable(1) or Disable(0) an extension's ability to
display indication for security sensor detection.
Input Data
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
209
Default
COS 1 ~ 15 = 0
COS 1 ~ 15 = 0
COS 1 ~ 15 = 0
COS 1 ~ 15 = 0
COS 1 ~ 15 = 0
COS 1 ~ 15 = 0
COS 1 ~ 15 = 0
COS 1 ~ 15 = 0