NEC UNIVERGE SV9100 Features And Specifications page 879

Supported Service Codes (Continued)
Type Incoming Feature
General Purpose Relay
VM Access (InMail and VMS)
Live Recording at SLT
VRS Routing for ANI/DNIS
Tandem Trunking
Transfer into Conference
Set DND for Other Extension
Cancel DND for Other Extension
Set Wake Up Call for Own Extension
Cancel Wake Up Call for Own Extension
Set Wake Up Call for Other Extension
Cancel Wake Up Call for Other Extension
Set Room to Room Call Restriction
Cancel Room to Room Call Restriction (Hotel)
Change Toll Restriction Class for Other Extension
Check-in
Check-out
Room Status Change for Own Extension
Room Status Change for Other Extension
Room Status Output
Hotel Room Monitor
Although some features may be available to the Mobile Extension, it may be advisable to disable them in
Class of Service. There are also features that should be disabled in any case.
The features to be disabled/not used for Mobile Extension include:
Contact Centre
TAPI (including applications such as UC Desktop Suite, etc.)
H.323 Trunks
Analog Trunks
Port Swap
Hotline
General Message
Message Waiting
Headset Mode for single line telephone
Flexible Transfer/Virtual Loop Back
Set By
Program Mobile
Extension
11-12-50 Yes
11-12-51 Yes
Yes
11-12-53
11-12-54 Yes
11-12-57 Yes
11-12-58 Yes
11-14-03 Yes
11-14-04 Yes
11-14-05 Yes
11-14-06 Yes
11-14-07 Yes
11-14-08 Yes
11-14-09 Yes
Yes
11-14-10
11-14-11 Yes
11-14-12 Yes
11-14-13 Yes
11-14-14 Yes
11-14-15 Yes
Yes
11-14-16
11-14-17 Yes
879
Set to Mobile
Extension
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes