To Change Entries In The Telephone Book - NEC UNIVERGE SV9100 Features And Specifications

on the page, the display advances to the next page. To select one of the entries, press the associated
number on the dial pad or the centre cursor pad button.
Search By Name
Type as many letters as you want used for the search. If searching for an entry labeled "Paul",
type "P". A page listing all entries beginning with the letter "P" is displayed. Or, you could type
"Paul" and it would display "Paul". After typing the search criteria, press the down pad to initiate
the search.
Search By Number
Press the NUM softkey. Now you can do the same search as above but using a telephone
number instead of a name. If searching for a number beginning with "1", type "1". A page listing
all entries beginning with the number "1" is displayed. Or, you could type part of all of the
telephone number "817" and it would display all telephone numbers beginning the "817". After
typing the search criteria, press the down pad to initiate the search.
Search Using Softkey
Press the Menu softkey and choose one of the following search types.
Select the NAME softkey to search by name. Use the same search criteria explained in the
"Search by Name" section.
Select the GRP softkey to search by groups within that phone book. Use the Up/Down
arrow to search through groups (1~40). Select the group you want to search and press the
centre cursor pad button. All the entries in the group are selected, press the Up/Down
arrows to scroll through all entries in the group.
Select the NUM softkey to search by number. Use the same search criteria explained in
the "Search by Number" section.
Select the MEM softkey to search by registry memory area (0~449). Type in the registry
memory area (0-449) to jump to that entry.
5. Once you have found entry, proceed to the change, delete or dial entry operation.

To change entries in the Telephone Book:

1. Press the DIR softkey.
2. Press the TELBK softkey.
3. Press the softkey associated with the first or second book.
- OR -
Press the Right cursor key.
4. Search to select the telephone name, telephone number or registry memory area (0~449) to
change. The selected entry flashes.
5. Press OK (centre cursor key).
6. Press the CHG softkey. The selected entry flashes.
7. Press the centre button on the cursor pad.
8. If you want to change the Telephone Book Entry Name, type the new name using the telephone
dial pad keys and press the centre button on the cursor pad. To accept the name change, press
the centre button on the cursor pad again. If you do not want to change the Telephone Book
Entry Name, press the centre button on the cursor pad again. The group is displayed.
If you want to change the Group Name type the new name using the telephone dial pad keys
and press the centre button on the cursor pad. To accept the name change, press the centre
1123